Technical Support for Long Range Ethernet (LRE)

1. LRE Modem with bubble-wrap and cardboard box
2. Power Supply with packing box
3. Red 20 foot LRE Cable

Please note that all materials including packing supplies must be returned at the end of the term.

1. Computer with Ethernet Card
2. CAT5 Ethernet Patch Cable with RJ-45 connectors
3. Red 20 foot LRE Cable

If you need help installing an Ethernet Card or Cable, please call the University Computer Help Desk at 438-HELP(8-4357).

Ethernet Cards and Cables are available to order at the TechZone, located in the Bone Student Center.

1. Make sure all parts on the part list are included in the LRE Installation Kit. If anything is missing, please call 438-8334, email resnet@ilstu.edu, or bring the LRE Installation Kit to the TechZone as soon as possible.

1. Plug the Red LRE Cable into the base of the phone jack mounted on the wall.

1. Place the LRE Modem near one computer in the room.
2. Run the Red LRE Cable from the phone jack to the connection port in the back of the LRE Modem.

1. Plug the power supply into the power outlet and LRE Modem.
2. Wait 30 seconds
3. Check for "Ready" light
4. Connect CAT5 Ethernet Patch Cable into an available port on the back of the LRE Modem.
5. Connect CAT5 Ethernet Patch Cable into Ethernet Card port on the back of the computer.

1. Start the computer and open a web browser (Internet Explorer, Netscape, etc.)
2. If you are using Internet Explorer, click Tools -> Internet Options... -> Connections -> LAN Settings
3. Be sure Automatically Detect Settings is checked [uncheck any others] and click OK twice.
4. Close and reopen your web browser.
5. Fill out the Residence Hall Network Access Registration Form

1. If the Residence Hall Network Access Registration Form does not appear, please call 438-HELP (8-4357) to contact the University Computer Help Desk.